Cudy FS1010PG network switch Fast Ethernet (10/100) Power over Ethernet (PoE) Black

Mean time between failures (MTBF): 50000 h | LED indicators: Power | AC input voltage: 100 - 240 V | LED indicators: Link | LED indicators: Activity | VLAN support: Yes | LED indicators: PoE | Copper ethernet cabling technology: 10BASE-T | Flow control support: Yes | Total Power over Ethernet (PoE) budget: 120 W | Uplink ports quantity: 2 | Product colour: Black | Storage temperature (T-T): -40 - 70 °C | Forwarding rate: 1.48 Mpps | Surge protection: Yes | Jumbo frames support: Yes | Jumbo frames: 1528 | Plug and Play: Yes | Operating temperature (T-T): 0 - 40 °C | Power over Ethernet plus (PoE+) ports quantity: 1 | Housing material: Metal | Cable types supported: Cat3 | Networking standards: IEEE 802.3af | Networking standards: IEEE 802.3az | Storage relative humidity (H-H): 5 - 90% | Networking standards: IEEE 802.3x | Width: 220 mm | Ethernet LAN data rates: 10,100 Mbit/s | Basic switching RJ-45 Ethernet ports type: Fast Ethernet (10/100) | Fanless: Yes | Power over Ethernet (PoE): Yes | Networking standards: IEEE 802.3at | Power source: AC | Cable types supported: Cat4 | Power connector: AC-in jack | Bandwidth: 2 Gbit/s | Height: 44 mm | Copper ethernet cabling technology: 100BASE-TX | Power over Ethernet (PoE) power per port: 30 W | Depth: 150 mm | Full duplex: Yes | Power supply included: Yes | Operating relative humidity (H-H): 10 - 90% | Half duplex: Yes | Basic switching RJ-45 Ethernet ports quantity: 8 | Cables included: AC | AC input frequency: 50 - 60 Hz | Power over Ethernet (PoE) ports quantity: 8 | Cable types supported: Cat5 | Cable types supported: Cat5e | MAC address table: 8000 entries | Packet buffer memory: 0.25 MB | Store-and-forward: Yes | Surge protection voltage: 4 kV | Warnings: Do not open the case or try to repair it yourself. | Warnings: The product is not suitable for disposal in the regular waste bin. Take your used electronic equipment to a recycling centre in accordance with local regulations.