Cudy AP1300 867 Mbit/s White Power over Ethernet (PoE)

Networking standards: IEEE 802.11a | Networking standards: IEEE 802.11g | Networking standards: IEEE 802.11b | Networking standards: IEEE 802.3af | 5 GHz: Yes | AC input frequency: 50/60 Hz | Networking standards: IEEE 802.3at | MIMO: Yes | Compliance certificates: CE | Networking standards: IEEE 802.11ac | Compliance certificates: Federal Communications Commission (FCC) | Antenna type: Internal | Product colour: White | Maximum data transfer rate: 867 Mbit/s | DC-in jack: Yes | Ethernet LAN data rates: 10 | Networking standards: IEEE 802.11n | Ethernet LAN data rates: 100 | Ethernet LAN data rates: 1000 Mbit/s | 2.4 GHz: Yes | AC input voltage: 100 - 240 V | Security algorithms: WPA-PSK | Storage relative humidity (H-H): 5 - 90% | Security algorithms: WPA2-PSK | Internal memory: 128 MB | Processor frequency: 880 MHz | Quick start guide: Yes | Reset button: Yes | Antennas quantity: 4 | Built-in processor: Yes | Operating relative humidity (H-H): 10 - 90% | Height: 57.1 mm | Placement: Ceiling, Wall | Operating temperature (T-T): -10 - 65 °C | Maximum data transfer rate (2.4 GHz): 300 Mbit/s | Ethernet LAN (RJ-45) ports: 1 | Security algorithms: WPA | Flash memory: 16 MB | Weight: 400 g | Power over Ethernet (PoE) type supported: Passive PoE | Mounting kit: Yes | Antenna direction type: Omni-directional | Cables included: LAN (RJ-45) | AC adapter included: Yes | Storage temperature (T-T): -40 - 70 °C | Quality of Service (QoS) support: Yes | Width: 231.9 mm | Power over Ethernet (PoE): Yes | MIMO type: Multi User MIMO | Antenna gain level (max): 5.31 dBi | Maximum data transfer rate (5 GHz): 867 Mbit/s | Output current: 1 A | LED indicators: System | Output voltage: 12 V | 6 GHz: No