Cudy FS1010PG network switch Fast Ethernet (10/100) Power over Ethernet (PoE) Black

Power source: AC | Cable types supported: Cat4 | AC input frequency: 50 - 60 Hz | Power over Ethernet (PoE) ports quantity: 8 | VLAN support: Yes | Packet buffer memory: 0.25 MB | MAC address table: 8000 entries | Surge protection voltage: 4 kV | Fanless: Yes | Copper ethernet cabling technology: 10BASE-T | Power over Ethernet (PoE): Yes | Cable types supported: Cat5 | Cable types supported: Cat5e | Cable types supported: Cat3 | Depth: 150 mm | LED indicators: PoE | Housing material: Metal | Basic switching RJ-45 Ethernet ports type: Fast Ethernet (10/100) | Networking standards: IEEE 802.3af | Networking standards: IEEE 802.3az | Total Power over Ethernet (PoE) budget: 120 W | Operating temperature (T-T): 0 - 40 °C | Operating relative humidity (H-H): 10 - 90% | Networking standards: IEEE 802.3at | Networking standards: IEEE 802.3x | Mean time between failures (MTBF): 50000 h | Full duplex: Yes | Height: 44 mm | Storage relative humidity (H-H): 5 - 90% | Width: 220 mm | Power supply included: Yes | Surge protection: Yes | Bandwidth: 2 Gbit/s | Power over Ethernet plus (PoE+) ports quantity: 1 | Basic switching RJ-45 Ethernet ports quantity: 8 | Jumbo frames support: Yes | Jumbo frames: 1528 | Copper ethernet cabling technology: 100BASE-TX | Cables included: AC | Power connector: AC-in jack | LED indicators: Power | LED indicators: Activity | AC input voltage: 100 - 240 V | LED indicators: Link | Product colour: Black | Flow control support: Yes | Ethernet LAN data rates: 10,100 Mbit/s | Store-and-forward: Yes | Storage temperature (T-T): -40 - 70 °C | Forwarding rate: 1.48 Mpps | Power over Ethernet (PoE) power per port: 30 W | Plug and Play: Yes | Warnings: Do not open the case or try to repair it yourself. | Uplink ports quantity: 2 | Half duplex: Yes | Warnings: The product is not suitable for disposal in the regular waste bin. Take your used electronic equipment to a recycling centre in accordance with local regulations.