Cudy GS105 network switch Gigabit Ethernet (10/100/1000) Black

Operating altitude: 0 - 3048 m | Product colour: Black | DC input voltage: 5 V | Master (outer) case length: 320 mm | Ethernet LAN data rates: 10,100,1000 Mbit/s | LED indicators: Loop | Flow control support: Yes | Storage temperature (T-T): -40 - 70 °C | Package width: 175 mm | Products per master (outer) case: 40 pc(s) | Mean time between failures (MTBF): 100000 h | Package weight: 400 g | Copper ethernet cabling technology: 100BASE-TX | Width: 100 mm | Switching capacity: 10 Gbit/s | Manual: Yes | Auto MDI/MDI-X: Yes | Jumbo frames support: Yes | Jumbo frames: 2000 | Package height: 63 mm | Auto-negotiation: Yes | Depth: 70 mm | LED indicators: Power | Operating relative humidity (H-H): 10 - 90% | Full duplex: Yes | Height: 26 mm | Copper ethernet cabling technology: 10BASE-T | MAC address auto-learning supported: Yes | Store-and-forward: Yes | AC input voltage: 100 - 240 V | LED indicators: Link | Power supply included: Yes | MAC address table: 1000 entries | Packet buffer memory: 1 MB | VLAN support: Yes | Copper ethernet cabling technology: 1000BASE-TX | Basic switching RJ-45 Ethernet ports quantity: 5 | MAC address auto-aging supported: Yes | Power source: AC/DC | Cable types supported: Cat3 | Power over Ethernet (PoE): No | Master (outer) case height: 400 mm | Cable types supported: Cat5 | Cable types supported: Cat5e | Package type: Box | Operating temperature (T-T): -10 - 50 °C | Package depth: 120 mm | Cables included: DC | Rack mounting: No | Weight: 200 g | Networking standards: IEEE 802.3x | Storage relative humidity (H-H): 5 - 90% | Cable types supported: Cat6+ | Cable types supported: Cat4 | Basic switching RJ-45 Ethernet ports type: Gigabit Ethernet (10/100/1000) | Master (outer) case width: 505 mm | Cable types supported: Cat6e | Cable types supported: Cat7e | Cable types supported: Cat6 | Cable types supported: Cat8.1 | Throughput: 7.44 Mpps | Cable types supported: Cat8 | Networking standards: IEEE 802.3 | Networking standards: IEEE 802.3ab | Networking standards: IEEE 802.3u | Master (outer) case gross weight: 17 kg | Cable types supported: Cat6a | Cable types supported: Cat7 | Half duplex: Yes | Warnings: Ensure the unit is adequately ventilated during operation. | Warnings: The product is not suitable for disposal in the regular waste bin. Take your used electronic equipment to a recycling centre in accordance with local regulations. | Warnings: Do not open the case or try to repair it yourself.