Infosec E4 Value 1000 uninterruptible power supply (UPS) Double-conversion (Online) 1 kVA 3 AC outlet(s)

Certification: CE | Warnings: Use the appliance in well-ventilated areas to avoid overheating. | Warnings: Do not disassemble the unit housing, there may be a risk of electric shock. | Warnings: Store away from sources of heat and open flame. | Compliance certificates: RoHS | Serial ports quantity: 1 | Depth: 220 mm | AC outlet types: C13 coupler | Efficiency: 88% | Power factor: 0.8 | Output power capacity: 1 kVA | Audible alarm(s): Yes | Maximum current: 10 A | Input operation voltage (min): 100 V | Input operation voltage (max): 240 V | Battery recharge time: 4 h | Battery technology: Sealed Lead Acid (VRLA) | Width: 145 mm | Output operation voltage (max): 240 V | Typical backup time at full load: 30 min | Height: 282 mm | Display type: LED | Typical backup time at half load: 9 min | Output voltage Total Harmonic Distortion (THD): 6% | Output operation voltage (min): 100 V | Cold start: Yes | Crest factor: 3:1 | Input frequency: 47 - 63 Hz | Audible alarm modes: Alarm when on battery, Fault, Overload alarm, Low battery alarm | Battery capacity: 9 Ah | ECO mode: Yes | Noise level: 50 dB | Number of input phases: 1 | Cables included: Output power cable, RS-232, Input power cable | Operating relative humidity (H-H): 20 - 90% | Input power factor: 0.99 | UPS topology: Double-conversion (Online) | Output voltage regulation: -1 - 1% | AC outlets quantity: 3 AC outlet(s) | Output frequency: 47/63 Hz | Product colour: Black | Operating temperature (T-T): 0 - 40 °C | Serial interface type: RS-232 | Battery voltage: 12 V | Manual: Yes | Response time: 4 ms | Weight: 8.6 kg | Number of output phases: 1 | Waveform: Pure sine | Form factor: Tower | Serial interface: Yes | Charging current: 1 A