Thermaltake Smart BX1 power supply unit 550 W 24-pin ATX ATX Black

Purpose: PC | Storage relative humidity (H-H): 10 - 95% | CPU power connector (4+4 pin): Yes | Combined power (-12V): 6 W | Height: 86 mm | Safety: CE, CB, TUV, EAC, RCM | Power Factor Correction (PFC) type: Active | Illumination: No | Combined power (+12V): 456 W | Operating temperature (T-T): 5 - 40 °C | Cooling type: Active | Efficiency: 88% | Peripheral (Molex) power connectors (4-pin): 4 | Storage temperature (T-T): -40 - 55 °C | Power supply unit (PSU) form factor: ATX | Product colour: Black | Depth: 140 mm | Hold time: 16 ms | Fan location: Top | Max output current (+12V): 38 A | Floppy drive power connector: 1 | CPU power cable length: 65 cm | Total power: 550 W | On/off switch: Yes | Combined power (+3.3V): 105 W | SATA power cable length: 500 mm | Noise level: 37.6 dB | EPS version: 2.92 | SATA power cable length: 150 mm | Max output current (+3.3V): 21 A | ATX version: 2.3 | Operating relative humidity (H-H): 20 - 85% | Maximum input current (@220V): 10 A | PCI Express connector: Yes | Width: 150 mm | Combined power (+5V): 105 W | Floppy disk drive connector: Yes | Cabling type: Non-Modular | Fan diameter: 12 cm | Motherboard power connector: 24-pin ATX | PCI Express power connectors (6+2 pin): 2 | Number of SATA power connectors: 6 | Number of fans: 1 fan(s) | Power Good signal delay range: 100 - 500 ms | Max output current (-12V): 0.5 A | Max output current (+5Vsb): 2.5 A | Peak power: 660 W | Peripheral (Molex) power cable length: 500 mm | Peripheral (Molex) power cable length: 150 mm | Motherboard power cable length: 60 cm | AC input frequency: 50 Hz | Input current: 10 A | Combined power (+5Vsb): 12.5 W | 80 PLUS certification: 80 PLUS Bronze | Mean time between failures (MTBF): 100000 h | Max output current (+5V): 16 A | AC input voltage: 230 V